As the main carrier of circuit connection, copper wire will be stripped and exposed at the terminal crimping position first. Copper wires are often damaged during the stripping process. The number of conductor strippable copper wires calculated based on the conductor area must be rounded to one decimal place.
For example, for a 0.5 wire, the number of copper wires that can be stripped is 0.35 according to the Japanese standard wire standard of 7 wires, which is 0 after rounding, indicating that the copper wire of this specification is not allowed to break when crimping and stripping. of. In order to facilitate the crimping between the conductor and the terminal, the shape of the insulation layer and the copper wire after the conductor is stripped should also be controlled. A good shape is the prerequisite to ensure the terminal crimping effect.