{"id":81132,"date":"2026-11-19T17:32:00","date_gmt":"2026-11-19T09:32:00","guid":{"rendered":"https:\/\/www.scondar.com\/?p=81132"},"modified":"2026-11-19T17:32:00","modified_gmt":"2026-11-19T09:32:00","slug":"projector-internal-harness-connector-selection-guide","status":"publish","type":"post","link":"https:\/\/www.scondar.com\/ru\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/","title":{"rendered":"Projector Internal Harness Connector Selection Guide"},"content":{"rendered":"<h1>Projector Internal Harness Connector Selection Guide<\/h1>\n<p><strong>Compact Wire-to-Board Connectors for Projector Interconnect Systems<\/strong><\/p>\n<p>Inside every modern projector \u2014 whether it is a home entertainment unit, a conference room display, or a short-throw classroom model \u2014 a dense web of internal wiring carries power, video signals, and control data between PCBs, LED arrays, cooling fans, and external ports. Selecting the right wire-to-board connector for these internal harness segments is a critical design decision: connectors that are even slightly oversized consume valuable chassis volume, while under-rated contacts can create reliability failures in high-temperature operation.<\/p>\n<p>At SCONDAR, we work with projectors and projection optics manufacturers globally, and one recurring engineering challenge is finding compact, reliable connectors that can survive the thermal cycling inside enclosed projector housings while routing multiple signal pairs within tight form-factor constraints. This guide walks through the connector selection considerations specific to projector internal applications and presents SCONDAR alternatives that are footprint-compatible with industry-standard series.<\/p>\n<h2>Application Context &amp; Design Challenges<\/h2>\n<p>Projector internals present a distinctive set of interconnect challenges that differ from most consumer electronics assemblies:<\/p>\n<ul>\n<li>Thermal environment:Enclosed chassis with limited airflow \u2192 operating temperatures can reach 60\u201380 \u00b0C near the light source (LED\/laser array) and 40\u201355 \u00b0C in the signal board area.<\/li>\n<\/ul>\n<ul>\n<li>Multi-board topology:Multiple PCBs (power board, LED driver, main logic, DMD\/optical engine) are interconnected by short internal harness segments \u2014 typically 50\u2013200 mm in length.<\/li>\n<\/ul>\n<ul>\n<li>Signal integrity:Video signal routing (HDMI, DVI, or LVDS) within the chassis requires connectors that do not introduce signal integrity issues on differential pairs.<\/li>\n<\/ul>\n<ul>\n<li>Space &amp; cost constraints:Cost pressure in consumer projectors drives demand for compact connectors that reduce chassis material usage without sacrificing reliability.<\/li>\n<\/ul>\n<ul>\n<li>Mixed power &amp; signal:Fan control, lamp ignition, and power conversion circuits may require connectors rated above the typical 2 A signal level.<\/li>\n<\/ul>\n<p>The most common failure mode we observe in projector connector selections is choosing a pitch or \u9501\u6263 type that forces a larger housing than the chassis geometry can accommodate. A secondary issue is contact current derating \u2014 a connector rated at 2 A in open air may derate to 1.2 A or lower at 85 \u00b0C, which is insufficient for power delivery circuits within the projector.<\/p>\n<h2>SCONDAR Product Matching for Projector Internal Harness<\/h2>\n<p>Based on the requirements above, we recommend two SCONDAR series as primary candidates for projector internal harness design-in:<\/p>\n<h3>SCT2011 \u2014 Hirose DF11 Compatible (Recommended Primary)<\/h3>\n<p>The SCT2011 series is a footprint-compatible alternative to the Hirose DF11, one of the most widely adopted dual-row connectors in business equipment and projection optics assemblies. Its defining characteristic is a 2\u00d7N contact arrangement condensed within a 5 mm body width, effectively doubling signal density compared to equivalent single-row 2.0 mm pitch connectors. This makes it particularly well suited for interconnecting the main logic board to the LED driver and cooling fan control modules inside compact projector housings.<\/p>\n<p>Key design features relevant to projector applications:<\/p>\n<ul>\n<li>Dual-row layout: up to 30 positions (2\u00d715) in a body only 5 mm wide \u2014 ideal for multi-signal routing in space-constrained chassis.<\/li>\n<\/ul>\n<ul>\n<li>2.0 mm pitch with crimp-style terminations compatible with AWG #22\u201328, covering both data cable and light-gauge power wire needs.<\/li>\n<\/ul>\n<ul>\n<li>Rated current 3 A per contact at 250 V AC, providing adequate margin for fan and LED driver circuits in enclosed projectors.<\/li>\n<\/ul>\n<ul>\n<li>Operating temperature range \u221225 \u00b0C to +85 \u00b0C, suitable for the signal board zone; derating should be verified for LED driver proximity.<\/li>\n<\/ul>\n<ul>\n<li>Both gold-plated and tin-plated contact options available \u2014 gold plating recommended for low-level signal contacts to maintain signal integrity on differential pairs.<\/li>\n<\/ul>\n<ul>\n<li>SMT-compatible variants available for automated pick-and-place assembly, supporting high-volume projector production lines.<\/li>\n<\/ul>\n<ul>\n<li>Friction lock mechanism provides audible and tactile confirmation during harness assembly \u2014 useful in high-mix production environments.<\/li>\n<\/ul>\n<h3>SCT2541 \u2014 KK 254 Compatible (Power &amp; Signal Hybrid)<\/h3>\n<p>For projector models that route higher-current segments \u2014 such as the power supply board connection to the LED array driver or the ballast for a lamp-based projector \u2014 the SCT2541 series provides a 2.54 mm pitch alternative with a 3 A current rating. Its larger pitch accommodates AWG #22\u201328 conductors with more generous crimp tolerances, which simplifies harness assembly and improves pull-out force consistency in production.<\/p>\n<ul>\n<li>2.54 mm pitch with dual-cantilever terminal design \u2014 proven in copiers, dishwashers, and other high-cycle consumer appliances, making it a natural fit for projector production volumes.<\/li>\n<\/ul>\n<ul>\n<li>Friction lock with polarizing keys prevents mis-mating during harness installation.<\/li>\n<\/ul>\n<ul>\n<li>Rated 3 A at 250 V AC; 1000 V AC withstand voltage provides a safety margin for power rail connections.<\/li>\n<\/ul>\n<ul>\n<li>Contact resistance \u2264 20 m\u03a9, maintaining efficiency in LED driver power paths.<\/li>\n<\/ul>\n<ul>\n<li>Available in single-row configurations from 2 to 20 positions, ideal for dedicated power or fan harness segments.<\/li>\n<\/ul>\n<h2>Technical Specification Overview<\/h2>\n<p>Table 1 \u2014 SCONDAR Connector Specifications for Projector Internal Harness<\/p>\n<table>\n<tr>\n<th>Parameter<\/th>\n<th>SCT2011 (DF11 Compatible)<\/th>\n<th>SCT2541 (KK 254 Compatible)<\/th>\n<\/tr>\n<tr>\n<td>Contact Pitch<\/td>\n<td>2.0 mm<\/td>\n<td>2.54 mm<\/td>\n<\/tr>\n<tr>\n<td>Contact Arrangement<\/td>\n<td>Dual row (2\u00d72 to 2\u00d715)<\/td>\n<td>Single row (2 to 20)<\/td>\n<\/tr>\n<tr>\n<td>Current Rating<\/td>\n<td>3 A \/ contact<\/td>\n<td>3 A \/ contact<\/td>\n<\/tr>\n<tr>\n<td>Voltage Rating<\/td>\n<td>250 V AC<\/td>\n<td>250 V AC<\/td>\n<\/tr>\n<tr>\n<td>Wire Gauge (AWG)<\/td>\n<td>#22 \u2013 #28<\/td>\n<td>#22 \u2013 #28<\/td>\n<\/tr>\n<tr>\n<td>Operating Temperature<\/td>\n<td>\u221225 \u00b0C to +85 \u00b0C<\/td>\n<td>\u221225 \u00b0C to +85 \u00b0C<\/td>\n<\/tr>\n<tr>\n<td>Contact Resistance<\/td>\n<td>\u2264 20 m\u03a9<\/td>\n<td>\u2264 20 m\u03a9<\/td>\n<\/tr>\n<tr>\n<td>Insulation Resistance<\/td>\n<td>\u2265 1,000 M\u03a9<\/td>\n<td>\u2265 1,000 M\u03a9<\/td>\n<\/tr>\n<tr>\n<td>Withstanding Voltage<\/td>\n<td>1,000 V AC \/ min<\/td>\n<td>1,000 V AC \/ min<\/td>\n<\/tr>\n<tr>\n<td>Locking Mechanism<\/td>\n<td>Friction lock<\/td>\n<td>Friction lock + polarizing keys<\/td>\n<\/tr>\n<tr>\n<td>Contact Plating<\/td>\n<td>Tin or gold (selectable)<\/td>\n<td>Tin or gold (selectable)<\/td>\n<\/tr>\n<tr>\n<td>Assembly Type<\/td>\n<td>Crimp, SMT-compatible<\/td>\n<td>Crimp<\/td>\n<\/tr>\n<tr>\n<td>Original Equivalent<\/td>\n<td>Hirose DF11<\/td>\n<td>KK 254<\/td>\n<\/tr>\n<\/table>\n<p>For projector internal harness designs that combine both signal and power routing, our engineering team typically recommends pairing the SCT2011 for the main board interconnection (dense signal routing) with SCT2541 segments dedicated to LED driver and fan power circuits. This hybrid approach optimizes chassis space while keeping each connector type matched to its actual current and signal requirements.<\/p>\n<h2>Design-In Considerations<\/h2>\n<h3>4.1 Crimp Termination &amp; Wire Selection<\/h3>\n<p>Both SCT2011 and SCT2541 use standard crimp-style contacts. For projector internal harnesses, we recommend AWG #24\u201326 for signal contacts and AWG #22\u201324 for power contacts. These gauges balance current-carrying capacity with the flexibility needed for routing through tight chassis channels. All SCONDAR crimp contacts are manufactured from phosphor bronze with either tin or selective gold plating; the gold-plated option is recommended for HDMI\/LVDS signal contacts to minimize contact resistance drift over high-temperature thermal cycles.<\/p>\n<p>SCONDAR&#8217;s production facilities use fully automated crimping machines with pull-out force testing performed on every production lot. For customers validating new designs, we recommend requesting sample connectors with the specific wire gauge planned for the projector harness to confirm crimp height and pull-out force compliance before committing to production volumes.<\/p>\n<h3>4.2 PCB Footprint Compatibility<\/h3>\n<p>Both the SCT2011 (Hirose DF11 footprint) and SCT2541 ( KK 254 footprint) are designed as drop-in replacements for their respective original series. This means PCB layout teams can adopt SCONDAR connectors without modifying existing board artwork \u2014 a key advantage during second-source qualification or cost-reduction engineering cycles. Header pin pitch, keying positions, and mounting hole locations are fully matched.<\/p>\n<h3>4.3 Operating Temperature &amp; Thermal Derating<\/h3>\n<p>The rated 3 A per contact for both series is specified under laboratory conditions. In a closed projector chassis, ambient temperatures in the power board area can exceed 60 \u00b0C during extended operation. We recommend applying a derating factor of approximately 0.7\u00d7 at 60 \u00b0C ambient, reducing the effective current per contact to approximately 2.1 A \u2014 still sufficient for most fan and LED driver circuits but worth validating for high-power laser projectors. For the main logic board signal connections (typically carrying &lt; 500 mA), the full 3 A rating provides substantial margin.<\/p>\n<h3>4.4 Polarization &amp; Anti-Misinsertion<\/h3>\n<p>Projector internal harnesses are often routed through cable channels where visual inspection during assembly is difficult. Both SCT2011 and SCT2541 incorporate polarizing keys and housing geometry that prevent incorrect orientation. The SCT2541 additionally features an audible friction-lock click, providing tactile confirmation that the connector is fully seated \u2014 an important quality-of-assembly signal for high-volume manufacturing.<\/p>\n<h2>Quality Assurance &amp; Supply Chain<\/h2>\n<p>SCONDAR&#8217;s manufacturing operations are certified to ISO 9001:2015, with in-line quality control checkpoints covering incoming material inspection (IQC), in-process quality control (IPQC), and finished goods testing. Each connector lot undergoes:<\/p>\n<ul>\n<li>100% visual and dimensional inspection against original specification drawings<\/li>\n<\/ul>\n<ul>\n<li>Contact resistance verification (\u2264 20 m\u03a9 per IEC 60512-2)<\/li>\n<\/ul>\n<ul>\n<li>Sample pull-out force testing on crimp terminations<\/li>\n<\/ul>\n<ul>\n<li>Withstanding voltage testing at 1,000 V AC (dielectric strength)<\/li>\n<\/ul>\n<ul>\n<li>RoHS and REACH compliance confirmation per SGS test report SZXEC24002907501-05<\/li>\n<\/ul>\n<p>For projector manufacturers evaluating SCONDAR as a connector supply partner, we offer free sample kits of both SCT2011 and SCT2541 series with your choice of circuit count and plating option. Sample lead time is typically 3\u20135 business days from request. Production orders are supported by our 80% automated production lines, with typical lead times of 2\u20133 weeks for standard configurations and 4\u20136 weeks for custom-engineered harness assemblies.<\/p>\n<p>SCONDAR also provides full custom wire harness manufacturing services \u2014 from wire cutting and stripping through crimping, housing insertion, and final electrical testing \u2014 giving projector OEMs a single-source solution for both connectors and pre-assembled internal harnesses. The full product catalog, including technical drawings and 3D step files for SCT2011 and SCT2541, is available for download at scondar.com.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<h3>How do I verify PCB footprint compatibility without modifying my existing board layout?<\/h3>\n<p>SCONDAR SCT2011 and SCT2541 are designed to match the PCB footprints of Hirose DF11 and KK 254 respectively. The recommended verification process is straightforward: (1) request free samples from SCONDAR, (2) confirm pin pitch and mounting hole positions against your existing Gerber files \u2014 all key dimensions are available in the product datasheets on our website \u2014 and (3) perform a trial assembly using your current PCB without soldering. If the connector seats without force and all polarization keys align, footprint compatibility is confirmed. For boards with non-standard pad layouts, our application engineering team can provide custom header variants.<\/p>\n<h3>What is the expected contact life for these connectors in a projector operating environment?<\/h3>\n<p>Both SCT2011 and SCT2541 are rated for a minimum of 50 insertion-removal (IR) cycles under IEC 60512-9 standard test conditions. In typical projector service life \u2014 where the internal harness is assembled once at manufacturing and not routinely disconnected \u2014 the connector is expected to outlast the projector chassis. If field serviceability is a requirement (e.g., modular projector designs that allow LED module replacement), we recommend specifying the gold-plated contact option for improved corrosion resistance during repeated mating cycles. Long-term thermal aging is managed through the \u221225 \u00b0C to +85 \u00b0C operating temperature window; designs operating consistently above 70 \u00b0C ambient should be reviewed with our technical team for specific derating guidance.<\/p>\n<p>Have a specific projector connector challenge or need assistance matching a connector to an unusual internal harness configuration? Leave your application parameters in the comments or request a sample kit for in-house validation testing \u2014 our application engineering team typically responds within one business day.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How do I verify PCB footprint compatibility without modifying my existing board layout?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SCONDAR SCT2011 and SCT2541 are designed to match the PCB footprints of Hirose DF11 and KK 254 respectively. Request free samples, compare the recommended land pattern, pad pitch, and mating interface against your existing PCB artwork, and run a trial SMT assembly with your standard reflow profile before full production.\"}}, {\"@type\": \"Question\", \"name\": \"What is the expected contact life for these connectors in a projector operating environment?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both SCT2011 and SCT2541 are rated for a minimum of 50 insertion-removal (IR) cycles under IEC 60512-9 standard test conditions. In an enclosed projector chassis with fan vibration and elevated temperature, derate for the actual thermal and mechanical environment before final design-in.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Projector Internal Harness Connector Selection Guide Compact Wire-to-Board Connectors for Projector Interconnect Systems Inside every modern projector \u2014 whether it is a home entertainment unit, a conference room display, or a short-throw classroom model \u2014 a dense web of internal wiring carries power, video signals, and control data between PCBs, LED arrays, cooling fans, and [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-81132","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Projector Internal Harness Connector Selection Guide - SCONDAR<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.scondar.com\/ru\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/\" \/>\n<meta property=\"og:locale\" content=\"ru_RU\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Projector Internal Harness Connector Selection Guide - SCONDAR\" \/>\n<meta property=\"og:description\" content=\"Projector Internal Harness Connector Selection Guide Compact Wire-to-Board Connectors for Projector Interconnect Systems Inside every modern projector \u2014 whether it is a home entertainment unit, a conference room display, or a short-throw classroom model \u2014 a dense web of internal wiring carries power, video signals, and control data between PCBs, LED arrays, cooling fans, and [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.scondar.com\/ru\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/\" \/>\n<meta property=\"og:site_name\" content=\"SCONDAR\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-19T09:32:00+00:00\" \/>\n<meta name=\"author\" content=\"info@scondar.com\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u041d\u0430\u043f\u0438\u0441\u0430\u043d\u043e \u0430\u0432\u0442\u043e\u0440\u043e\u043c\" \/>\n\t<meta name=\"twitter:data1\" content=\"info@scondar.com\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/\"},\"author\":{\"name\":\"info@scondar.com\",\"@id\":\"https:\\\/\\\/www.scondar.com\\\/#\\\/schema\\\/person\\\/5bdf51dcf11158ed6335d131d9eab9d3\"},\"headline\":\"Projector Internal Harness Connector Selection Guide\",\"datePublished\":\"2026-11-19T09:32:00+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/\"},\"wordCount\":1703,\"articleSection\":[\"Uncategorized\"],\"inLanguage\":\"ru-RU\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/\",\"url\":\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/\",\"name\":\"Projector Internal Harness Connector Selection Guide - SCONDAR\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.scondar.com\\\/#website\"},\"datePublished\":\"2026-11-19T09:32:00+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.scondar.com\\\/#\\\/schema\\\/person\\\/5bdf51dcf11158ed6335d131d9eab9d3\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/#breadcrumb\"},\"inLanguage\":\"ru-RU\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.scondar.com\\\/2026\\\/11\\\/19\\\/projector-internal-harness-connector-selection-guide\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.scondar.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Projector Internal Harness Connector Selection Guide\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.scondar.com\\\/#website\",\"url\":\"https:\\\/\\\/www.scondar.com\\\/\",\"name\":\"SCONDAR\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.scondar.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ru-RU\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.scondar.com\\\/#\\\/schema\\\/person\\\/5bdf51dcf11158ed6335d131d9eab9d3\",\"name\":\"info@scondar.com\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ru-RU\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0d02c747c33c0b4784c58c9ca75c2de60c4223ffa72423b59f8872ce23079a38?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0d02c747c33c0b4784c58c9ca75c2de60c4223ffa72423b59f8872ce23079a38?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0d02c747c33c0b4784c58c9ca75c2de60c4223ffa72423b59f8872ce23079a38?s=96&d=mm&r=g\",\"caption\":\"info@scondar.com\"},\"sameAs\":[\"https:\\\/\\\/www.scondar.com\"],\"url\":\"https:\\\/\\\/www.scondar.com\\\/ru\\\/author\\\/scondar-2\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Projector Internal Harness Connector Selection Guide - SCONDAR","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.scondar.com\/ru\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/","og_locale":"ru_RU","og_type":"article","og_title":"Projector Internal Harness Connector Selection Guide - SCONDAR","og_description":"Projector Internal Harness Connector Selection Guide Compact Wire-to-Board Connectors for Projector Interconnect Systems Inside every modern projector \u2014 whether it is a home entertainment unit, a conference room display, or a short-throw classroom model \u2014 a dense web of internal wiring carries power, video signals, and control data between PCBs, LED arrays, cooling fans, and [&hellip;]","og_url":"https:\/\/www.scondar.com\/ru\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/","og_site_name":"SCONDAR","article_published_time":"2026-11-19T09:32:00+00:00","author":"info@scondar.com","twitter_card":"summary_large_image","twitter_misc":{"\u041d\u0430\u043f\u0438\u0441\u0430\u043d\u043e \u0430\u0432\u0442\u043e\u0440\u043e\u043c":"info@scondar.com"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/#article","isPartOf":{"@id":"https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/"},"author":{"name":"info@scondar.com","@id":"https:\/\/www.scondar.com\/#\/schema\/person\/5bdf51dcf11158ed6335d131d9eab9d3"},"headline":"Projector Internal Harness Connector Selection Guide","datePublished":"2026-11-19T09:32:00+00:00","mainEntityOfPage":{"@id":"https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/"},"wordCount":1703,"articleSection":["Uncategorized"],"inLanguage":"ru-RU"},{"@type":"WebPage","@id":"https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/","url":"https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/","name":"Projector Internal Harness Connector Selection Guide - SCONDAR","isPartOf":{"@id":"https:\/\/www.scondar.com\/#website"},"datePublished":"2026-11-19T09:32:00+00:00","author":{"@id":"https:\/\/www.scondar.com\/#\/schema\/person\/5bdf51dcf11158ed6335d131d9eab9d3"},"breadcrumb":{"@id":"https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/#breadcrumb"},"inLanguage":"ru-RU","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.scondar.com\/2026\/11\/19\/projector-internal-harness-connector-selection-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.scondar.com\/"},{"@type":"ListItem","position":2,"name":"Projector Internal Harness Connector Selection Guide"}]},{"@type":"WebSite","@id":"https:\/\/www.scondar.com\/#website","url":"https:\/\/www.scondar.com\/","name":"SCONDAR","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.scondar.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ru-RU"},{"@type":"Person","@id":"https:\/\/www.scondar.com\/#\/schema\/person\/5bdf51dcf11158ed6335d131d9eab9d3","name":"info@scondar.com","image":{"@type":"ImageObject","inLanguage":"ru-RU","@id":"https:\/\/secure.gravatar.com\/avatar\/0d02c747c33c0b4784c58c9ca75c2de60c4223ffa72423b59f8872ce23079a38?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/0d02c747c33c0b4784c58c9ca75c2de60c4223ffa72423b59f8872ce23079a38?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/0d02c747c33c0b4784c58c9ca75c2de60c4223ffa72423b59f8872ce23079a38?s=96&d=mm&r=g","caption":"info@scondar.com"},"sameAs":["https:\/\/www.scondar.com"],"url":"https:\/\/www.scondar.com\/ru\/author\/scondar-2\/"}]}},"_links":{"self":[{"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/posts\/81132","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/comments?post=81132"}],"version-history":[{"count":1,"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/posts\/81132\/revisions"}],"predecessor-version":[{"id":81133,"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/posts\/81132\/revisions\/81133"}],"wp:attachment":[{"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/media?parent=81132"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/categories?post=81132"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.scondar.com\/ru\/wp-json\/wp\/v2\/tags?post=81132"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}