No.1 Индустриальный парк Гаода,
Фэнган, Дунгуань, Китай

inquiry@scondar.com

Photocopier and Multifunction Printer Connector Selection: Dense Wiring Solutions for Office Equipment PCB Integration

Photocopier and Multifunction Printer Connector Selection: Dense Wiring Solutions for Office Equipment PCB Integration

Commercial photocopiers and multifunction office machines (MFPs) route a dense web of signal and power wiring between high-speed print engines, scanner arrays, paper transport motors, control panels, and power supply units. The internal connectors must combine high wiring density, reliable long-term performance, and cost efficiency — three requirements that often pull in opposite directions in high-volume office equipment design. This article shares our engineering perspective on connector selection for photocopier and MFP applications.

Application Context: Connector Challenges in Office Imaging Equipment

  • High wiring density: MFPs route dozens of signal and power connections within compact internal chassis, requiring connectors with optimal pin density.
  • Mixed signal types: A single MFP may route high-voltage AC power to the fuser, low-voltage DC to PCBs, and high-speed data between the scanner engine and main controller — each requiring appropriate connector characteristics.
  • Continuous operation duty cycle: Office imaging equipment is designed for all-day continuous operation, requiring connectors with stable long-term electrical performance.
  • Thermal management: Fuser units reach 180°C–200°C; nearby connectors and wiring must withstand radiant heat exposure.
  • Cost efficiency at high volume: MFP manufacturers produce hundreds of thousands of units annually, making connector unit cost and assembly efficiency critical design drivers.
  • Field serviceability: MFPs require periodic maintenance access, exposing internal wiring to repeated connector mating during service visits.

SCONDAR Product Matching: SCT2011 Series (Hirose DF11 Compatible, 2.0mm Dual-Row)

The SCONDAR SCT2011 series — footprint-compatible with the Hirose DF11 — is a dual-row wire-to-board connector at 2.0mm pitch that delivers high wiring density within a compact 5mm overall width. The dual-row configuration doubles the signal capacity per unit width compared to single-row connectors, making the SCT2011 particularly effective for MFP internal wiring where PCB real estate is at a premium.

The DF11 design was originally developed for business equipment — copiers, printers, and fax machines — and the SCT2011 inherits this application heritage. Its 3A current rating handles both power distribution and signal routing within the machine, reducing the number of connector series required in a typical MFP design. Gold and tin plating options allow engineers to optimize contact materials for their specific application — gold for low-level signal contacts in the scanner array, tin for power distribution contacts.

Technical Specification Overview

Parameter SCONDAR SCT2011 Specification
Контактная площадка 2,0 мм
Количество должностей 2×2 to 2×15 positions (dual-row)
Текущий рейтинг 3A
Номинальное напряжение 250V
Temperature Range -25°C to +85°C
AWG Compatibility 22AWG – 28AWG
Сопротивление контактов ≤ 20 mΩ
Insulation Resistance ≥ 1000 MΩ
Выдерживаемое напряжение 1000 В переменного тока в минуту
Plating Options Gold or Tin
PCB Width 5mm (dual-row compact)
Compatible Original Series Hirose DF11

Design-In Considerations for Office Imaging Equipment

The SCT2011’s dual-row compact geometry is ideal for MFP internal wiring between the main controller board and peripheral boards (scanner engine, paper transport, control panel). Engineers should verify the PCB footprint dimensions against the SCT2011 datasheet, particularly the recommended pad length and width for the specific position count and plating option selected.

For MFP designs that route wiring through the paper path area — where the fuser generates significant radiant heat — the SCT2011’s +85°C upper temperature limit should be verified against the actual ambient temperature at the connector location. In fuser-adjacent zones, we recommend routing wiring with heat-resistant sleeving or selecting connectors with extended temperature ratings.

The SCT2011 is available in SMT-compatible configurations, supporting automated pick-and-place assembly for high-volume MFP production lines. For service-heavy applications where connectors may be mated and unmated multiple times during the machine’s service life, the friction-lock mechanism provides reliable retention without positive lock complexity.

Quality Assurance and Supply Chain

SCONDAR’s SCT2011 series is manufactured under ISO 9001:2015 quality management, with RoHS and REACH compliance. Standard packaging includes embossed tape and reel for SMT lines, with tube packaging available for through-hole configurations.

For MFP manufacturers seeking to consolidate multiple connector interfaces, SCONDAR’s wire-to-board connector portfolioincludes a full range of Hirose DF11 compatible alternatives, allowing engineers to standardize on a single manufacturer for their complete internal connector specification.

Frequently Asked Questions

What is the recommended PCB pad layout for the dual-row SCT2011 in SMT assembly?

SCONDAR provides comprehensive CAD data packages for the SCT2011 series, including recommended pad layouts, paste mask guidelines, and reflow profile recommendations for lead-free assembly processes. Request the technical datasheet package from our application engineering team.

Can the SCT2011 be used for the high-voltage fuser connection in a copier?

The SCT2011’s 250V rating is suitable for some fuser-related low-voltage DC connections, but not for the high-voltage AC fuser heater circuit (typically 100V–240V AC). High-voltage fuser connections require connectors rated for the specific AC voltage and with appropriate creepage/clearance distances. SCONDAR’s application team can recommend high-voltage connector alternatives for fuser applications.

Designing a next-generation MFP or office imaging device?Request SCT2011 samples and datasheetsfrom SCONDAR’s technical team, or discuss your complete internal wiring specification.

Поделиться этим постом

Поделиться в facebook
Поделиться в reddit
Поделиться в twitter
Поделиться в linkedin
Поделиться в pinterest
Поделиться в print
Поделиться в vk
Поделиться в skype
Поделиться в email

Вопросы? Напишите нам!

Любой запрос или вопрос, предложение приветствуются, чем больше деталей сообщение с, тем быстрее ответ вы получите.

Контактная информация

No. 1, Gaoda Industrial Park, Shuibu Rd
Фэнган, Дунгуань, Китай (материк).

Социальные сети

Давайте поговорим